StickIt Pro Pressure 5kg Kit– Ultimate Epoxy Tile Injection Kit
Say goodbye to costly and messy tile replacements. The StickIt Pro Epoxy Tile Injection Repair Kit from Shalex lets you re-glue loose or drummy tiles in place—no need to remove or replace them. Ideal for professionals and DIYers alike, it’s surprisingly easy to use—with just a drill and this kit, you can reclaim secure tile surfaces in no time.
Unleash Uninterrupted Power & Precision
This innovative pressure pot allows for a continuous air feed from any air compressor, delivering the consistent pressure needed for a flawless adhesive application. Say goodbye to manual pumping fatigue and inconsistent flow. With the simple control of an adjustable regulator and an ergonomic thumb-triggered injection gun, you can maintain a steady, even stream of adhesive, ensuring optimal coverage and penetration every time.
Engineered for Performance
Crafted from lightweight (under 1.3kg) 2-litre aluminium with a strong carry handle, this pot is built for portability and durability. It includes adjustable air flow regulator and two fast-release air bleed valves (levered and pull type) for precise control and safe operation. The 195cm clear hose provides ample reach and visibility during application.
Important Note: Recommended operating pressure is 20 psi – 30 psi.
Upgrade your StickIt Pro experience today and inject confidence into every repair.
What's Included In The Box
- 5kg Stickit™ Pro Adhesive (10 x 500gm pouches)
- 1 x 2 Litre Pressure Injection Pot,
- Detailed Instruction Booklet
- 1 x 1 Litre Mixing Bottle
- 2 x Accessories Pack: 4 x 2mm Drill Bits, 4 x 1.6mm injection needles, 4 x injection plugs
Why Choose StickIt Pro?
- Super-strong epoxy formula cures at any depth and fills large gaps
- Bonds to difficult surfaces—porcelain, natural stone, even tile over tile
- Works on damp surfaces (though not where water pools)
- Clear, flexible bond that withstands moisture and temperature swings
- Minimal mess—water cleanup and dry-shake packaging make the job easy
Application
Stickit Pro has a pot life of 2+ hours once mixed and typically cures within 24 hours with maximum bond strength achieved after 7 days.
Coverage
Floor Tiles: Approx. 5m² / kg
Wall Tiles: Approx. 10m² / kg
Activation Tile
Dry: 24 hours
Fully Cured: 72 hours
Pot life and curing times will be shorter at temperatures above 25°C.
Shelf Life
24 Months
Store below 35°C
Application Temperature
Surface Temp. 10°C – 40°C
Do not use when surface temperatures fall below 5°C as curing will stop.
Clean Up
Water
Perfect For:
- Fixing “hollow” or loose floor and wall tiles
- Rebonding cement render, laminate, carpet, or timber flooring
- Tackling stubborn installations: stone, porcelain, or tile-over-tile scenarios
SKU | RP-SPPOT5K |
Barcode # | 9321647000781 |
Brand | Shalex |
Shipping Weight | 8.5000kg |
Shipping Width | 0.400m |
Shipping Height | 0.210m |
Shipping Length | 0.350m |
Calculate Shipping
Be The First To Review This Product!
Help other BISG - Tilers Online users shop smarter by writing reviews for products you have purchased.