Universal Primer is a rapid drying solvent free low VOC water based acrylic primer. For use over porous and non porous substrates such as ceramic tiles, painted surfaces (water-based only) and sealed or burnished concrete floors. For extremely non porous, hard and tight substrates it is recommended that a light grind or sand be conducted to enhance adhesion. Universal primer is compatible with cement based ceramic tile adhesives and levelling compounds.
Universal Primer can be applied internally or externally over clean, dry surfaces. Sub Floor Preparation: subfloor must dry, sound and be free of oil, grease, wax, coatings, curing compounds, dust, old adhesive and any other contamination which could inhibit bond. Concrete floors must be dry sound, smooth and clean in accordance with current relevant Australian standards. Do not use solvents, or acid etching to clean the subfloor.
Subfloors that display high moisture levels it is recommended a RLA Moisture Barrier product be applied. Do not apply primer if temperature is below 5°C or greater than 35oC. Please ensure substrates such as ceramic tiles, sealed or burnished floors have no coatings or curing compounds residing on the surface before the application of priming
For extremely non porous, hard and tight substrates it is recommended that a light grind or sand be conducted to enhance adhesion.