null
Created with Sketch. Created with Sketch.
Toggle menu
Phone 1300 400 888
1300 400 888
  • Raimondi Levelling System Clips - Classic
  • Coverage Chart

    • Raimondi Levelling System Clips - Classic (3-12mm tiles, 1.5mm space)

    $67.00

    or make 4 interest-free payments of $16.75 AUD fortnightly with Afterpay More info

    (No reviews yet) Write a Review
    SKU:
    RA-LSBC250
    UPC:
    8024648067937
    Shipping:
    Calculated at Checkout

    Product Description

    Raimondi Levelling System Clips
    Classic (for 3-12mm tiles, 1.5mm space)

    • A correct setting requires the perfect levelling of the tiles.
    • Very often it is hard to properly set flexible and low thickness tiles as well as big sized and heavy tiles because of the uneven floor foundation.
    • As a result, tiles which seemed perfectly levelled while installing them, once the adhesive set, they show differences in level that compromise the aesthetics.
    • This can be avoided thanks to the levelling spacers which preserve the perfect levelling of the tiles and, also, they speed up the setting.
    • So, the levelling spacers make the setting easy, fast and the tiles are perfectly levelled.
    • For tiles from 3 up to 12 mm thickness (1/8” - 1/2”)
    • The wedge works for all clip sizes and it is re-usable virtually forever.
    • Both the positioning and the removal of the levelling spacers are easy and quick.
    HOW TO USE:
    How to set the support:
    1. After having spread the adhesive, insert the support underneath the tiles and along the 4 sides.
    2. According with tiles size, set one or more supports on every side of the tile.
    3. Set the tile and beat it with a rubber mallet.
    How to insert the wedge:
    1. Insert the wedge in the support slot paying attention not to pass the breakpoint.
    2. To facilitate this operation, the use of the special traction-adjustable-pliers is recommended.
    How to remove the support:
    Once the adhesive is set, the protruding part of the support, has to be removed by separating it from the base. This can be done thanks to the traction-adjustable-pliers, with a rubber mallet or even with feet. Beat parallel to the joint.

    Product Videos

    Custom Field

    Product Reviews

    Write a Review

    You May Also Like...