GAP FILLING EPOXY PASTE ADHESIVE FOR CIVIL ENGINEERING USE
Megapoxy PM is specially formulated structural non-sag epoxy filling paste and adhesive. This easy to use two-part epoxy sets after mixing to an extremely durable adhesive ideal for bonding natural stone, concrete, steel, timber, glass and masonary. Its easy to use 1:1 mixing make it suitable for onsite applications.
- Precast concrete articles
- Concrete Pipes and Tanks
- Grouting bolts
- Fibreglass articles
- Natural stones
- Concrete floors and stairs
- Bricks and ceramics
- Concrete columns
- In-situ formed concrete
METALS: Should be grit blasted to clean surface. Mechanically abraded and degreased. Wire brushing is not entirely satisfactory and gives minimal adhesion only.
PAINTED SURFACES: A proprietary brand paint stripper should be used. Concrete - the surface may be either flame cleaned or mechanically abraded.
Mixing Ratio:1 part resin to 1 part hardener by volume
MIXING: Mix until uniform grey or white
WORKING LIFE AT 25°C: 45 minutes
MINIMUM APPLICATION TEMPERATURE: 10°C
MINIMUM CURE TIME: 12 hours at 25°C
FULL CURE TIME: 4 days at 25°C